home>Knowledge Center>Mining Equipment>The limestone slurry processing plant in South Afr

The limestone slurry processing plant in South Africa

Limestone slurry supplying system

1 the system components
Limestone slurry supply system is to supply the right amount of limestone slurry absorber. In South Africa, the amount of sulfur dioxide from the flue gas slurry total decision. The system consists oflimestone slurry pumps, limestone slurry box, relay box, density meter, adjust the doors and other equipment.
2 the process
Made of limestone grinding to 27% concentration of limestone slurry as absorbents, limestone slurry into the box, and then the limestone slurry pump into the absorber. Each FGD limestone slurry pump is generally equipped with two separate pumps, with the corresponding start and stop and start and stop FGD. Limestone slurry in the absorber tank farther away. In the limestone slurry absorber can be installed near the relay box, and then through the secondary for the pump to the absorber for the pulp, it will ensure the reliability for the slurry. For the slurry pipeline in the density meter is equipped with limestone slurry to detect the density as a recycling container mill a main theme of filtered water volume control valve signal to regulate the concentration of limestone slurry.
Limestone slurry into the top box with a stirrer. To ensure uniform concentration of slurry.

Dry mortar composition

Dry mortar with inorganic cementations material and fine aggregate and water is made by mixing ratio, also known as mortar. For masonry and plaster works can be divided into surface mortar and mortar, the former for brick, stone, brick and other masonry and installation of components; the latter for the walls, floors, roof and beams column structure of the surface of the plaster, in order to achieve protection and decorative requirements. There’s an ordinary mortar material is gypsum, lime paste, or clay mixed with fibrous materials to enhance the preparation of water into a paste, known as the gray, cream, mud or clay. Gray used a hemp (hemp mixed with lime paste), gray bar paper (mixed paper, lime cream bars), gray plaster (in plaster of Paris mixed with lime paste and paper or glass fiber reinforced) and doped plaster (clay mixed with straw or a small amount of lime and straw).

Dry mortar Scope

Dry mortar is a screening process by drying the aggregate (such as quartz sand), inorganic cementitious materials (cement) and additives (such as polymers) and in proportion to the physical mixture of a granular or powder to bagged or bulk form delivered to the site, water can be used directly after mixing of materials. Also known as dry mortar material, dry mixture, mix dry powder, some construction adhesive is also in this category. The limestone slurry processing plants in the construction industry to play a thin layer of adhesive, liner, protective and decorative, construction and renovation wide range of applications.

Dry mortar production line equipment

Dry mortar production line equipment, mainly by the elevator, premixed warehouse, small silos, mixers, finished products warehouse, packing machine, dust collector, control cabinet, vapor balance system. Efficient use of dual-axis paddle mixer, the state does not destroy the original materials to ensure the thermal coefficient of mortar will not damage the insulating material to reduce the shape to ensure that the insulation effect of the product. Dry mortar production line with the customer needs more formula set, can be applied to severe dust environment, you can also display weighing data and other functions, so the theory advanced, then dry mortar production line, or labor-intensive to be smaller, the efficiency to be a little higher .

 

>> <<
goTop